Intermec Easycoder Pc4 Usb Driver Windows 7
Fixed issue with RFID not turning off (models PD, PC, PM43 and PM23). Fixed issue with Media sensitivity not being set according to selection in driver (models PD, PC, PM43 and PM23). Ver.: 5.1.16.6707 Fixed setting for Direct Thermal mode on PD, PC, PM43 and PM23 models. Ver.: 5.1.16.6534 When using 'Manual Settings' for stock media setting on new Intermec PM and PC series, darkness value can be any selected value now. Ver.: 5.1.16.6511 Fixed spooler crash when printing from NiceLabel 2017 to a printer using Advanced TCP/IP port. Ver.: 5.1.15.6474 Port monitor crashed print spooler on the second print when using Advanced TCP/IP.
This is fixed now. Ver.: 5.1.15.6379 Intermec Esim printers had 'inactive' button Miscellaneous on advanced setup dialog. This button is active again.
Ver.: 5.1.13.6232 Fixed issue with DNS IP resolution not working when printer network name is longer then 25 characters. Ver.: 5.1.13.6194 Barcode is printed on correct position for all 4 rotations on CPCL printer models.
But CPCL language prints correct just 0 and 90 degree rotation! Other rotations (landscape) are not recommended. Ver.: 5.1.12.6105 Intermec PC, PM and PD models use now correct barcode height calculation.
Ver.: 5.1.12.6099 Intermec PD43, PD43c, PC43 and PC23 are center positioned printer and positioning for labels thinner than max. Print width is corrected now. Ver.: 5.1.12.6033 Added USB PnP ID for IntermecF2 printer. Ver.: 5.1.11.5971 Fixed About dialog issue with garbage after name for printers with name = 32 chars. Ver.: 5.1.11.5965 Intermec PD43 use similar (new) command syntax like PC43 printer. Intermec PD43 is center align printer and not left align.
Start adjustment for PD43 models and Tear off mode is -16,6mm. Ver.: 5.1.11.5791 Fixed NiceLabel crash when changing the printer on Label SetupPrinter dialog and then disabling 'Use advanced printer driver interface'. Ver.: 5.1.11.5753 Printer RTC (time in minutes) is now send to printer with command 'MM' instead of 'mm'. Ver.: 5.1.10.5831 Code 128 keeps also parentheses and spaces as part of data. Before this correction IPL printer ignore parentheses and spaces in the bar code but keep them in the interpretive field. Ver.: 5.1.10.5789 Intermec PD43 and Intermec PD43c printers with IPL and DP printer language support also RFID functionality. Ver.: 5.1.10.5782 Intermec PD43 and Intermec PD43c printers with IPL and DP printer language are added into Intermec distribution.
Ver.: 5.1.10.5692 When updating drivers which have already defined their own stocks, barcode fonts or command fonts, PrnInst application failed with message box 'List index out of bounds'. This is fixed now. Ver.: 5.1.09.5642 Intermec PC and PM models with DP language are using new (correct) printer setup commands and helps user with predefined stock names and default darkness values for each specific stock. Ver.: 5.1.09.5633 Updated maximum page length for PXi, PFi, PA30, PC43 and PC23 printers models. Ver.: 5.1.09.5549 Installer ends if user choose 'don't install.' Option in Windows warning dialog.
Ver.: 5.1.08.5619 Added addition location where label format can be stored (beside Flash RAM, CF) and this is option 'Local printer disk'. Ver.: 5.1.08.5500 Intermec DP printer support internal EAN128 barcode command.
Ver.: 5.1.08.5435 In case of print and store label layout, user gets duplicate next print because previous layout is in the memory. With every new print there must be no layout recalled. This is corrected now. Ver.: 5.1.08.5063 Fixed issue where editing a stock causes an error message.
Ver.: 5.1.07.5161 Datamatrix barcode did not print with latest Fingerprint firmware 8.91. The print stream for Datamatrix barcode is corrected so it print well also with new firmware version. The limitation is use of automatic aspect ratio and square shape of the code. Ver.: 5.1.07.4926 Printer Install Wizard supports silent installation of Port Monitor modules. Ver.: 5.1.06.5024 Intermec PM23c models added to distribution. Ver.: 5.1.06.5009 QR barcode positioning has been corrected for Intermec IPL printers.
Ver.: 5.1.06.4921 RFID EPC (Gen2) - 128 bit tag is supported on Intermec printers. Ver.: 5.1.06.4818 New languages supported are: Danish, Hebrew, Slovak and Portuguese (Brazil). Portuguese language is removed. Ver.: 5.1.06.4815 Language monitor will now retry sending data to printer 3 times before reporting an error to spooler. Ver.: 5.1.06.4800 PrnInst utility quits driver installation if user doesn't trust the publisher.
Ver.: 5.1.05.4788 Driver settings are now correctly updated after being imported. Ver.: 5.1.04.5100 PrnInst didn't not work on folders with long path name. Current version support paths up to 260 ( MAXPATH) characters.
Ver.: 5.1.03.4633 Help file was updated with a note that some applications can lock the driver and prevent it from being updated by a new version. Ver.: 5.1.03.4603 Plug & Play ID for Intermec PC43t IPL (203dpi) is corrected.
The correct one is 'IntermecPC43t-203-IB8D9'. Ver.: 5.1.03.4546 Fixed issue with MicroPDF not printing because rows and columns parameter was switched. Ver.: 5.1.02.4507 Fixed custom stocks selection in driver dialog: driver now correctly selects stock. This only applies to drivers version 5.1.02.4378. Ver.: 5.1.02.4472 On Windows 8 and Windows Server 2012 users were not able to change language settings.
Now they can change language settings if they have administrative rights. Ver.: 5.1.02.4468 Code MicroPDF417 on Intermec - DP printer models is printing now as internal element. Export to printer or Store/Recall functionality is working now also with variable data on 2D barcodes (PDF417, MicroPDF417, Datamatrix).
Ver.: 5.1.02.4464 When doing any export type from the labeling software, the variable data used on code MicroPDF417 are present now. Ver.: 5.1.02.4452 Intermec DP printers use improved algorithm for calculate the EAN13/EAN8 barcode height (when human readable is used) for better WYSIWYG. Ver.: 5.1.02.4378 Microsoft Access was reporting wrong paper names when custom stocks are defined in driver. Now it works OK. Ver.: 5.1.02.4371 After leaving an edit field the values in it are now correctly checked according to their specified minimum/maximum values and displayed in correct format for the selected measurement unit. Ver.: 5.1.01 4402 Add a line stating the requirements needed for asian fonts to be printed correctly by the driver.
Ver.: 5.1.01.4360 Prevent occasional labeling software crash when loading labels created with NiceLabel drivers older than version 4.6.16. Ver.: 5.1.01.4356 Some Intermec printers had wrong Plug & Play ID's. Ver.: 5.1.00.4354 Cutter functionality corrected for printing from Windows applications and cutter set to cut every n labels. Ver.: 5.1.00.4306 Solved problem with multi-thread printing (sometimes the stream is not correct). Ver.: 5.0.02.4070 Automatic start/stop adjustment did not send any command to the printer. This is corrected now and printer receives pre-defined values for start and stop adjustment visible in the drivers advanced setup dialog. This adjustment differs according to print mode selection.
Ver.: 5.0.00.4197 Driver help for barcode font 'y dimension' updated. Ver.: 5.0.00.3910 Intermec PC series are center positioning printers, but initial they ware handled as left oriented printers. This is corrected now. Font list have been taken from PM series but not all fonts are available on PC series. There are three fonts which are not supported on PC models: DingDings, Futura and Prestige. Ver.: 5.0.00.3910 New Intermec printers are renamed from 'EasyCoder+modelname' into 'Intermec+modelname'. Following printers added: EasyCoder PX4i (406 dpi) - IPL EasyCoder PF8d (203 dpi) EasyCoder PF8t (203 dpi) EasyCoder PF8t (300 dpi) EasyCoder PB50 (203 dpi) - DP EasyCoder PB50 (203 dpi) - IPL Ver.: 4.4.65 EPL printers support now also day offset for internal printer clock. It is possible to use internal date & time also on barcode element from now on.
Ver.: 4.4.64 Removed Help button as no help is available. Ver.: 4.4.64 New Japanese translation for Printer Install Wizard Ver.: 4.4.63 When user starts Printer Install Wizard the application is shown but without focus Ver.: 4.4.63 Changed default number for cutting to 1 label instead of 0. Ver.: 4.4.60 Changed file info for Printer Install Wizard Ver.: 4.4.60 Default value for Always use default settings is not correct when instaling it the driver with a configuration file attached. Ver.: 4.4.52 DLL files for user interface translation did not include version info data. Ver.: 4.4.52 Labels transfered from different systems now retain their driver settings. Ver.: 4.4.51. POSTNET barcodes have a fixed height and width, but the interface allows the user to change these dimensions.
Ver.: 4.4.50 Import and export didn't work if filename and path exceeded the length of 80 characters while windows support 256 character lengths Ver.: 4.4.50 Click on 'Stocks' panel caused error if stock list was empty. This is fixed now. Nick evans minor league stats. Ver.: 4.4.30 - support for preinstall on all supported platforms Ver.: 4.4.01 EndDocument escape was sent even when there was no StartDocument.
Ver.: 4.4.01. If driver gets no separator character description for decimal number from the OS, driver puts a '+' or ',' string as default character. The result was seen for page size (example) Now the dot character '.' Is set for default separator in this case. Ver.: 4.4.00 Invalid stocks are now marked. User can open the Stock properties dialog and press OK to fix the problem (which is usually stock dimension).
Stock size will be automatically adjusted. Ver.: 4.4.00 UI for commands fonts works now properly also in Japanese language. Ver.: 4.4.00 For Intermec Esim printers, encoding of FNC characters in Code128 barcode is supported now. Ver.: 4.4.00 In some rare cases streams sent to the printer had an extra '0' added in it.
Download and install INTERMEC EasyCoder PC4 driver EasyCoder PC4 is a USB Universal Serial Bus device. This driver was developed by INTERMEC. The hardware id of this driver is USB/VID067E&PID0011. How to manually install INTERMEC EasyCoder PC4 driver. You can download from the link below the driver installer file for the INTERMEC EasyCoder PC4 driver. The archive contains version 1.00.2154 dated 2004-04-16 of the driver.
Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is enabled please accept of the driver and run the setup with administrative rights. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
When the operation finishes restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!.
This driver is not digitally signed. File size of the driver: 243778 bytes (238.06 KB) Driver rating 3.2 stars out of 55853 votes. This driver is compatible with the following versions of Windows:. This driver works on Windows 2000 (5.0) 32 bits. This driver works on Windows XP (5.1) 32 bits. This driver works on Windows Server 2003 (5.2) 32 bits.
This driver works on Windows Vista (6.0) 32 bits. This driver works on Windows 7 (6.1) 32 bits. This driver works on Windows 8 (6.2) 32 bits.
This driver works on Windows 8.1 (6.3) 32 bits. This driver works on Windows 10 (10.0) 32 bits. How to install INTERMEC EasyCoder PC4 driver using DriverMax The most important advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver using DriverMax?.
Usb Driver Windows 7 64-bit
Open DriverMax and press on the yellow button that says SCAN FOR DRIVER UPDATES NOW. Wait for DriverMax to analyze each driver on your PC. Take a look at the list of detected driver updates. Scroll the list down until you find the INTERMEC EasyCoder PC4 driver.
Intermec Easycoder C4 Driver Windows 8
Click on Update. That's it, you installed your first driver!